CIR90 DTH Hammers and Button Bits Down The Hole Hammer for Quarry Drilling
CIR90 DTH Hammers and Button Bits
DTH hammer is used for drilling holes through a wide range of rock types, the variety of which continues to extend well beyond the original conception of early blast hole drilling.
Down-the-Hole refers to where the hammer action occurs when compared to drifter hammers, which hammer on top of the drill string. The DTH hammer piston always makes direct contact with the drill bit and there is generally no loss of transmitted energy as the hammer drills deeper, as is the case with drifter (top hammer) rigs.
Roschen offers a wide range of DTH hammers suitable for a variety of drilling operations. Our Down the Hole hammers provide the most versatile and cost effective rock drilling method.
Advantages:
1. Valveless air distribution. More reliable.
2. Simple design of the piston, long life.
3. More efficient energy transfer, faster drilling speed, lower air consumption and lower oil consumption.
4. Fewer internal parts, simple structure, longer life, less failure and easier to maintain because all the parts are heat treated.
5. It is easy to disassemble because the top sub, the drive chuck and the external cylinder are connected by multi step thread.
DTH Hammer series:
1. High pressure DTH Hammer
SD series hammer: SD 5, SD 6, SD 8 and SD 12 DTH Hammers.
QL series hammer: QL 50, QL 60, QL 80 DTH Hammers.
HD series hammers: DHD 3.5, DHD 340. DHD 350, DHD 360, DHD380 DTH Hammers.
Mission series hammers: M30, M40, M50, M60, M80 DTH Hammers.
Cop series hammers: Cop 32/34, Cop 42/44, Cop 54/64 DTH Hammers.
2. Low air pressure:
BR1, BR2, CIR 70, CIR 90, J60, J80, J100, J150, etc.
| Product Name: |
CIR90 down the hole DTH drill hammer |
| Description: |
CIR90 down the hole DTH drill hammer were used for blast hole drilling |
| and water well drilling project. |
| Working with DTH drilling pipe and DTH drill bit, mainly applied in Mining, |
| Marble quarry or well drilling and other construction projects. |
| Quality level: |
95% similarity to COP/SD/MISSION/QL/BR/DHD etc famous brand |
| MOQ: |
No requirement for testing and trial order |
| Series: |
COP/ SD/ DHD/ IR/ Mission/ QL/ BR/ CIR etc |
| |
| Specifications: |
Weight (kg) |
External Diameter (mm) |
Connection thread |
Hole range (mm) |
Impact rate |
Recommended rotation speed |
| Low air pressure DTH hammer CIR type |
5 ~22 |
50~180 |
CIR** |
55~200 |
820 rpm |
|
| Middle air pressure BR & COP type |
10~30 |
70~110 |
|
85~115 |
|
|
| 3 inch DTH hammer |
24.5 |
81 |
API 2 3/8" Reg |
90~110 |
28Hz (at 17 bar) |
28 r/min |
| COP34/QL30 etc |
| 4 inch DTH hammer |
39.2 |
99 |
API 2 3/8" Reg |
110~150 |
27Hz (at 17 bar) |
25~40 r/min |
| COP44/DHD340 etc |
| 5 inch DTH hammer |
71.5 |
125 |
API 2 3/8" or API 3 1/2" Reg |
135~165 |
25Hz (at 17 bar) |
20~30 r/min |
| COP54/Mission50 etc |
| 6 inch DTH hammer |
98 |
142 |
API 3 1/2" Reg |
152~216 |
23Hz (at 17 bar) |
15~25 r/min |
| COP64/QL60 etc |
| 8 inch DTH hammer |
188 |
180 |
API 4 1/2" Reg |
203~305 |
20Hz (at 17 bar) |
15~20 r/min |
| COP84/SD8 etc |
| DTH Bits Specifications |
| Hammer Size |
Bits diameter |
Shank |
ROSCHEN CODE |
| Metric |
Inch |
| 1" |
64mm-70mm |
2 1/2"-2 3/4" |
BR1 |
ROS 11 |
| 2" |
70mm-95mm |
2 3/4"-3 3/4" |
MACH20/BR2 |
ROS 22 |
| 3" |
90mm-102mm |
3 1/2"-4" |
COP32/COP34/MACH303 |
ROS 32 |
| M30/DHD3.5/BR3 |
ROS 34 |
| 4" |
105mm-152mm |
4 1/8"-6" |
COP44/DHD340/MACH44 |
ROS 42 |
| SD4/M40/QL40 |
ROS 44 |
| 5" |
133mm-165mm |
5 1/4"-6 1/2" |
COP54/DHD350R/MACH50 |
ROS 52 |
| SD5/M50/QL50/BR5 |
ROS 54 |
| 6" |
152mm-254mm |
4 1/8"-10" |
COP64/DHD360/SD6 |
ROS 62 |
| M60/QL60/Bulroc BR6 |
ROS 64 |
| 8" |
203mm-330mm |
8"-13" |
COP84/DHD380/SD8 |
ROS 82 |
| QL80/M80 |
ROS 84 |
| 10" |
254mm-380mm |
10"-15" |
SD10 |
ROS 100 |
| NUMA100 |
| 12" |
305mm-508mm |
12"-20" |
DHD1120/SD12 |
ROS 120 |
| NUMA120/NUMA125 |
| Notes: Metzke, Remet thread is available! |
| ROSCHEN DTH Hammers Specifications |
| Hammer Size |
Bit Shank |
ROSCHEN Code |
Connection Thread |
Suitable bit |
Working pressure |
Air consumption |
| 2" |
BR2 |
ROS 11 ROS 22 |
RD50 box |
￠70-￠90mm |
0.7-1.75Mpa |
0.7Mpa |
4.5m3/min |
| 1.0Mpa |
4m3/min |
| 1.4Mpa |
5m3/min |
| 3" |
DHD3.5 |
ROS 32 |
API 2 3/8" Reg |
￠90-￠110mm |
1.0-1.5Mpa |
1.0Mpa |
4.5m3/min |
| COP32/COP34 |
| M30 |
1.5Mpa |
9m3/min |
| 4" |
DHD340 |
ROS 34 |
API 2 3/8" Reg |
￠110-￠135mm |
1.0-2.5Mpa |
1.0Mpa |
6m3/min |
| COP44 |
| QL40 |
| SD4 |
1.8Mpa |
10m3/min |
| M40 |
2.4Mpa |
15m3/min |
| 5" |
DHD350 |
ROS 52 ROS 54 |
API 2 3/8"Reg/API 3 1/2" Reg |
￠135-￠155mm |
1.0-2.5Mpa |
1.0Mpa |
9m3/min |
| COP54 |
| QL50 |
| SD5 |
1.8Mpa |
15m3/min |
| M50 |
2.4Mpa |
23m3/min |
| 6" |
DHD360 |
ROS 62 ROS 64 |
API 3 1/2" Reg |
￠155-￠190mm |
1.0-2.5Mpa |
1.0Mpa |
10m3/min |
| COP64 |
| QL60 |
| SD6 |
1.8Mpa |
20m3/min |
| M60 |
2.4Mpa |
28.5m3/min |
| 8" |
DHD380 |
ROS 82 ROS 84 |
API 4 1/2" Reg |
￠195-￠254mm |
1.0-2.5Mpa |
1.0Mpa |
15m3/min |
| COP84 |
| QL80 |
1.8Mpa |
26m3/min |
| SD8 |
2.4Mpa |
34m3/min |
| M80/M85 |
| 10" |
SD10 |
ROS 100 |
API 6 5/8" Reg |
￠254-￠311mm |
1.0-2.5Mpa |
1.0Mpa |
22m3/min |
| Numa100 |
1.8Mpa |
40m3/min |
| ROS 100 |
2.4Mpa |
55m3/min |
| 12" |
DHD1120 |
ROS 120 |
API 6 5/8" Reg |
￠305-￠445mm |
1.0-2.5Mpa |
1.0Mpa |
30m3/min |
| SD12 |
1.8Mpa |
56m3/min |
| Numa120 |
2.4Mpa |
78m3/min |
| Notes: Any special size of DTH bits will be available by requests. |
| Metzke, Remet thread is available! |
We can also provide related products DTH hammers, ODEX system, symmetric systems, slide block drilling systems, etc and DTH drilling pipes for various thread API REG, API IF, BECO, etc.
FAQ
Quality warranty:
Our products are made of high quality steel and all spares parts are inspected strictly before shipping. We have quickly responses for your complaint and suggestion.
Package:
Using ply-wooden cases and pallet for package to protect the products and avoid the damage during transportation. Also we can customize package according to your special requests.
Production time:
Generally need 15-25 days
Transportation:
By air, By Express or By sea according to your requests.
The information about dth drill bit you may like to know before order:
1. Methods of Payment:
T/T (Telegraphic Transfer) or Western Union or L/C at sight
2. Handling time for an order
Based on order quantity, normally it takes 20 days for production.
in 3 working days after receiving the advance payment
3. Shipping way
Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air
Bulk order: we suggest by air or by sea.
4. Quality Control
We have our own experienced QC.
There will be strict inspection and testing for every order before shipping out.
5. After Services:
a. Our sales team will response for your question within 24 hours (Holidays Excluded)
b. Technical Support will be available in any time
6. Quality & Service:
A. There will be strict inspection and testing for every order before shipping out.
B. Our sales team and Technical Support will response for your question within 24 hours through skype: ROSCHEN.TOOL and WhatsApp/Wechat: +86-13764195009
C. Free replacement will provide once the failure confirmed caused or our product quality
For more information please contact:
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
Skype: ROSCHEN.TOOL , ROSCHEN_GROUP
WeChat: +86-137 6419 5009 ; +86-135 8585 5390
WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390
Email: roschen@roschen.com ; roschen@roschen.net
Website: http://www.roschen.com ; http://www.roschen.net
http://www.roschen.cn ; http://www.roschendrill.com
http://www.roschenmining.com ; http://www.roschendrilling.com
http://www.roschengroup.com
Product Tags:
|
|
CIR90 DTH Hammers and Button Bits Down The Hole Hammer for Quarry Drilling Images
|
